Mac iPod Recovery

 

iPod Data Recovery Software Features

 

• Recovers lost, formatted data from iPod Classic and iPod Shuffle.
• User-friendly graphical interface for easy recovery.
• Quick Recovery option allows faster recovery process.,/
• The Advance recovery feature enables deep scan of the iPod to trace every data lost, delted, or formatted.
• The Deleted File Recovery option enables recovery of all the deleted data from the iPod.
• You can save the scan information as an image file use it for later recovery.
• The Create Image feature is helpful in creating an image file of the iPod. The image file is saved as a .dat file, which can be use to recover data at a later point of time.
• The software enables to resume the recovery process at any point of time. The scanned information up to that point of time is saved as an image file.
• File filter option help you narrow down the scanning criteria by selective recovery of file types.
• Supported Image File Types: Nikon(Intel), Nikon(Motorola), Cannon(CR2), Cannon(CRW), Olympus, Sony, Kodak, K25, KDC – Intel, DCR, Fuji, Minolta, JPEG, Tiff, BMP, Gif, PNG, DNG, PSD, ARW, Pentax, Sigma.
• Supported Audio/Video File Types: MOV, VVI, WAV, MIDI, OGG, AIFF, MP4, RPS, ASF, WMA, WMV, AU, MP3.

 

The iPod recovery software for Mac users is a 'Do-It-Yourself' utility that allows the users an easy, 3-Step recovery process. Attach the iPod to your Mac system and 'Select' the iPod as a drive. 'Scan' it for recovery and then 'Save' the recovered data. Below mentioned are the details about various recovery Tabs and the steps to recover your lost, deleted, formatted data using this iPod recovery software.

 

The user interface for the software, Stellar Phoenix iPod Recovery features three distinguished tabs for easy data recovery. Namely, the tabs are 'Data Recovery', 'Resume Recovery' and 'Create Image'.

 

Data Recovery Tab – As you launch the software, by default, this tab has been selected. Under this, there lies three other tabs: Quick recovery, Advanced Scan, Deleted File Recovery with different functionalities.

 

• Quick Recovery : This option facilitates scanning of the entire hard drive to list every piece of data on it (Existing as well as deleted).
• Advanced Scan : This option facilitates through scanning of the iPod blocks and lists every file present in it. This process usually takes comparatively more time than 'Quick Recovery', however is more efficient.
• Deleted File Recovery : This option scans and shows only the previously deleted files. The process does not list the files present on the iPod.

 

Resume Recovery Tab facilitates to resume the recovery process either by the previously created image file of the iPod or the scanning information of the iPod. In order to recover the deleted data by using the scanning information, you need to attach the original iPod. However, recovery of data using the image file, does not need the iPod to be connected to the system.

 

Create Image Tab can be immensely helpful in creating the image of an iPod, which later can be used to recover the data from it. Moreover, you do not even need the iPod with you for the recovery process, the only thing you need is that you must have space greater than or equal to that of the iPod.

 

With bad sectors/blocks, the scanning process slows down, each time we scan the iPod. However, the image that we create, is a single file containing only the content of the iPod along with the structure of the iPod and no bad blocks. Hence, the scanning gets faster and you do not even need to attach the iPod.

 

Note : At times, while the iPod can not be detected by the software or flashes error messages, such as “iPod not found”, following steps can guide you, access the iPod:

 

• Go to the iTunes.
• Under the 'Devices' option, select the connected iPod.
• Next, go to the 'Settings'.
• Finally, check-in the button next to "Enable Disk Use" option.

 

Stellar Phoenix iPod Recovery Demo version allows you to take a view of all the recoverable items and the recovery features. Download the version and take a close look of the utility. You can avail complete recovery with the full version.

 

FAQs on iPod Recovery Mac tools and Utilities

 

• Which all file types does the software support ?
• What are the primary features of the software ?
• How do I recover deleted music from my Ipod ?
• My IPod has been corrupted. How I will recover my data ?
• How to recover data from an inaccessible Ipod ?

 

Which all file types does the software support ?

 

MIDI, AIFF, M4A, OGG, RPS, M4P, AU, AVI, MOV, ASF, WMV, MP4, WMA, MP3, MPG, MPEG, GIF, WAV.

Back to top

 

What are the primary features of the software ?

 

• iPod recovery in the file deletion case.
• Restoration of the play list in the same order after recovery.
• Graphically rich user interface.
• Compatible with all generations of iPod like iPod classic, iPod Mini, iPod Shuffle, iPod Nano.
• Complete and valuable iPod recovery from formatted or crashed media.
• Read-only utility to ensure no-write operation.
• Find File, File Mask and File Filter options to help you search, view and recover any specific file type.
• Available for Windows and Macintosh operating systems

 

Back to top

How do I recover deleted music from my Ipod ?

 

Open the stellar software and follow the below procedure :

• Click on “Recovery” icon and click on ‘Play’ button.
• Choose the iPod media. If a media is attached to the system, it will appear on the drop down list by default.
• Click on ‘Deleted File Recovery’ and click on the ‘Play’ button.
• The scanning process will start and files extracted from the media will appear in the scan result. Check the folder from which files are to be recovered and click Play button to start recovery. Double click the folder or ‘>’ to recover the specific file.

 

Make sure that you are not using the same Ipod from which you are trying to recover your data, to save the recovered data.

Back to top

 

My IPod has been corrupted. How I will recover my data ?

 

Open the stellar software and follow the below procedure :

• Click on "Recovery" icon and click on  Play  button.
• Choose the iPod media. If a media is attached to the system, it will appear on the drop down list by default.
• Click on  Advance Recovery  icon and click on  Play  button.

Back to top

 

How to recover data from an inaccessible Ipod ?

 

Open the stellar software and follow the below procedure :

• Click on “Recovery” icon and click on ‘Play’ button.
• Choose the iPod media. If a media is attached to the system, it will appear on the drop down list by default.
• Click on ‘Quick Recovery’ icon and click on ‘Play’ button.
• The scanning process will start and files extracted from the media will appear in the scan result. Check the folder from which files are to be recovered and click Play button to start recovery. Double click the folder or ‘>’ to recover the specific file.
• Select the destination folder to save the recovered data.

 

Make sure that you are not using the same iPod from which you are trying to recover your data, to save the recovered data.

Back to top