The complete error message says – This application failed to start because no QT platform plugin could be initialized.<\/p>
For those who don’t know, QT is a cross-platform software used for creating GUI. Although it offers extensive support for Windows, you may experience compatibility issues due to older, outdated, or the broken software version installed.<\/p>
The issue usually occurs when you try to access OBS Studio, Python, and Gaming apps (Origin, Civilization VI, etc.).You may also come across this problem while using movie streaming apps.<\/p>
What causes No Qt Platform Plugin Could Be Initialized?<\/strong><\/h2>The probable reasons behind this bug could be several, including corrupted or damaged system files, incompatible or corrupted applications, buggy Windows updates, etc. While this error may seem problematic, some fixes shared below will help you get rid of it quite easily.<\/p>
Fixes for No QT Platform Plugin Could Be Initialized Error<\/strong><\/h2>You can try out the below-discussed workarounds to remove the error – the application failed to start because no QT platform plugin could be initialized from the Windows system. These fixes are result-driven as many users have reportedly been able to resolve the error. With no further delay, let’s fix the problem for good!<\/p>
#1 Change the QT File Location<\/strong><\/h3>Several users have been able to fix this error by simply changing the QT file location. This little trick can save a lot of your time and energy. Follow the below-said steps.<\/p>
\n- Open File Explorer<\/strong> by pressing Windows + E<\/strong> and then go to This PC.<\/strong><\/li>\n\n\n\n
- There, open Local Disk (C:),<\/strong> and in the Search<\/strong> bar, type pyqt5_tools<\/strong> and hit Enter<\/strong>.<\/li>\n\n\n\n
- When found, right-click on the pyqt5_tools<\/strong> folder and select the Open folder location<\/strong> option from the available ones.<\/li>\n\n\n\n
- Open the PyQt5<\/strong> folder on the next prompt, go to the Qt<\/strong> folder, and open the Plugins<\/strong> folder.<\/li>\n\n\n\n
- Next, right-click on the platforms<\/strong> folder and select Copy<\/strong>.<\/li>\n<\/ul>
![\"select-platforms-folder-under-the-sub-folder-of-plugins\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/Python.jpg\")
<\/figure>\n- Go to Site-Packages<\/strong> from the address bar.<\/li>\n\n\n\n
- Now, open the pyqt5_tools<\/strong> folder, and thereafter, open the Qt<\/strong> folder.<\/li>\n\n\n\n
- Navigate to the bin<\/strong> folder and there, on the blank side, right-click and Paste<\/strong> the folder.<\/li>\n\n\n\n
- Replace the files in the destination (if prompted).<\/li>\n<\/ul>
#2 Run System File Checker Scan<\/strong><\/h3>There is a possibility that you’d encounter this error due to corrupted or damaged system files. To be sure, you can run SFC (System File Checker). It is a Windows built-in utility to replace the bad versions of system files with the right ones, thus fixing the problems. Follow the given steps:<\/p>
\n- Run CMD (Command Prompt) as administrator.<\/li>\n\n\n\n
- In the elevated cmd window, type the sfc\/scannow<\/strong> command and press Enter<\/strong>.<\/li>\n<\/ul>
![\"run-sfc-scannow-command\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/run-sfc-scannow-command-2.jpg\")
<\/figure>\n- Wait for a while and let the process complete.<\/li>\n\n\n\n
- Once done, read the instructions on the screen and check if you need to follow any further instructions.<\/li>\n\n\n\n
- Finally, exit the Command Prompt window and check if the error persists.<\/li>\n<\/ul>
Note: <\/strong>How to Run System File Checker (SFC) Scan in Windows<\/strong><\/a><\/figure>#3 Perform Clean Boot<\/strong><\/h3>Various third-party apps installed on your system can also cause this error. Performing a clean boot will help you find the root cause behind the error and fix the issue. It is quite similar to booting your PC in Safe Mode<\/a>. However, it provides more control over programs and services running at startup. Follow the given steps to do the same:<\/p>\n- Open Windows Search<\/strong> and type msconfig<\/strong>. It will show System Configuration<\/strong>, click Open<\/strong> to proceed.<\/li>\n<\/ul>
![\"open-system-configuration-from-windows-search\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/open-system-configuration-from-windows-search.jpg\")
<\/figure>\n- Go to the Services<\/strong> tab and select Hide all Microsoft Services > Disable all > Apply<\/strong>.<\/li>\n<\/ul>
![\"hide-all-Microsoft-service-click-disable-all-and-click-apply\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/hide-all-Microsoft-service-click-disable-all-and-click-apply.jpg\")
<\/figure>\n- Now, click OK<\/strong> and then follow Startup > Open Task Manager<\/strong>.<\/li>\n\n\n\n
- There, identify the application with which you are facing the issue and click Disable<\/strong>.<\/li>\n<\/ul>
![\"disable-problematic-app-from-Task-Manager\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/disable-problematic-app-from-Task-Manager.jpg\")
<\/figure>\n- Close the window, and click OK<\/strong> to complete the process on the Startup<\/strong> tab.<\/li>\n\n\n\n
- When your system will restart, it will be in a clean boot environment. If still, you’re having the error, remove the problematic app from your system.<\/li>\n<\/ul>
#4 Uninstall Problematic App<\/strong><\/h3>If you see the error with some particular application, check the app version. If there’s an old or incompatible app version you’re using, you can uninstall it. Follow the given steps to do the same:<\/p>
\n- Open Settings<\/strong> (press Windows + I<\/strong>) and then follow Apps > Apps & Features<\/strong>.<\/li>\n\n\n\n
- Select the problematic app and click Uninstall > Uninstall<\/strong>.<\/li>\n<\/ul>
![\"uninstall-buggy-applications\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/uninstall-buggy-applications.jpg\")
<\/figure>\n- Finally, click Yes<\/strong> when prompted to confirm your action. That’s it. The app will be removed from your system.<\/li>\n<\/ul>
#5 Reinstall the Correct App Version<\/strong><\/h3>If the application you removed is important, you can reinstall the latest compatible application version. While reinstalling the app, make sure that you’re downloading it from the official site only. Additionally, check the version you’re downloading and the app support. If there’s any issue, restart your system and see if you can do it now without any issues.<\/p>
#6 Uninstall Buggy Windows Updates<\/strong><\/h3>If you encountered the error after installing any Windows update, you can simply uninstall it or perform a system restore. Remember, uninstalling the update will remove all the changes, and settings that occurred to your system. If certain, remove the buggy Windows update with the following steps:<\/p>
\n- Open Settings<\/strong> by pressing Windows + I<\/strong> and then go to Update & Security > Windows Update > Update history.<\/strong><\/li>\n<\/ul>
![\"go-to-Update-history-in-Windows-Update-section\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/go-to-Update-history-in-Windows-Update-section.jpg\")
<\/figure>\n- On the next prompt, click Uninstall updates.<\/li>\n<\/ul>
![\"select-Uninstall-updates\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/select-Uninstall-updates.jpg\")
<\/figure>\n- Select the update you recently installed and then click Uninstall<\/strong>.<\/li>\n<\/ul>
![\"select-update-and-click-Uninstall\"](\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2023\/05\/select-update-and-click-Uninstall.jpg\")
<\/figure>The update will be removed. Reboot your system and see if the problem is solved.<\/p>
No Qt Platform Plugin Could be Initialized Error- Gone for Good!<\/strong><\/h2>System errors like Application Failed to Start Because No Qt Platform Plugin Could be Initialized, are easily fixable. You just need to put more attention while performing the methods discussed above. Other than this, if you encounter a problem accessing your system or some folder, your data could be at risk. Keep professional data recovery software<\/a> handy, it will help you big time even in the future.<\/p><\/p>
You can try out the below-discussed workarounds to remove the error – the application failed to start because no QT platform plugin could be initialized from the Windows system. These fixes are result-driven as many users have reportedly been able to resolve the error. With no further delay, let’s fix the problem for good!<\/p>
#1 Change the QT File Location<\/strong><\/h3>Several users have been able to fix this error by simply changing the QT file location. This little trick can save a lot of your time and energy. Follow the below-said steps.<\/p>
\n- Open File Explorer<\/strong> by pressing Windows + E<\/strong> and then go to This PC.<\/strong><\/li>\n\n\n\n
- There, open Local Disk (C:),<\/strong> and in the Search<\/strong> bar, type pyqt5_tools<\/strong> and hit Enter<\/strong>.<\/li>\n\n\n\n
- When found, right-click on the pyqt5_tools<\/strong> folder and select the Open folder location<\/strong> option from the available ones.<\/li>\n\n\n\n
- Open the PyQt5<\/strong> folder on the next prompt, go to the Qt<\/strong> folder, and open the Plugins<\/strong> folder.<\/li>\n\n\n\n
- Next, right-click on the platforms<\/strong> folder and select Copy<\/strong>.<\/li>\n<\/ul>
<\/figure>\n- Go to Site-Packages<\/strong> from the address bar.<\/li>\n\n\n\n
- Now, open the pyqt5_tools<\/strong> folder, and thereafter, open the Qt<\/strong> folder.<\/li>\n\n\n\n
- Navigate to the bin<\/strong> folder and there, on the blank side, right-click and Paste<\/strong> the folder.<\/li>\n\n\n\n
- Replace the files in the destination (if prompted).<\/li>\n<\/ul>
#2 Run System File Checker Scan<\/strong><\/h3>There is a possibility that you’d encounter this error due to corrupted or damaged system files. To be sure, you can run SFC (System File Checker). It is a Windows built-in utility to replace the bad versions of system files with the right ones, thus fixing the problems. Follow the given steps:<\/p>
\n- Run CMD (Command Prompt) as administrator.<\/li>\n\n\n\n
- In the elevated cmd window, type the sfc\/scannow<\/strong> command and press Enter<\/strong>.<\/li>\n<\/ul>
<\/figure>\n- Wait for a while and let the process complete.<\/li>\n\n\n\n
- Once done, read the instructions on the screen and check if you need to follow any further instructions.<\/li>\n\n\n\n
- Finally, exit the Command Prompt window and check if the error persists.<\/li>\n<\/ul>
Note: <\/strong>How to Run System File Checker (SFC) Scan in Windows<\/strong><\/a><\/figure>#3 Perform Clean Boot<\/strong><\/h3>Various third-party apps installed on your system can also cause this error. Performing a clean boot will help you find the root cause behind the error and fix the issue. It is quite similar to booting your PC in Safe Mode<\/a>. However, it provides more control over programs and services running at startup. Follow the given steps to do the same:<\/p>\n- Open Windows Search<\/strong> and type msconfig<\/strong>. It will show System Configuration<\/strong>, click Open<\/strong> to proceed.<\/li>\n<\/ul>
<\/figure>\n- Go to the Services<\/strong> tab and select Hide all Microsoft Services > Disable all > Apply<\/strong>.<\/li>\n<\/ul>
<\/figure>\n- Now, click OK<\/strong> and then follow Startup > Open Task Manager<\/strong>.<\/li>\n\n\n\n
- There, identify the application with which you are facing the issue and click Disable<\/strong>.<\/li>\n<\/ul>
<\/figure>\n- Close the window, and click OK<\/strong> to complete the process on the Startup<\/strong> tab.<\/li>\n\n\n\n
- When your system will restart, it will be in a clean boot environment. If still, you’re having the error, remove the problematic app from your system.<\/li>\n<\/ul>
#4 Uninstall Problematic App<\/strong><\/h3>If you see the error with some particular application, check the app version. If there’s an old or incompatible app version you’re using, you can uninstall it. Follow the given steps to do the same:<\/p>
\n- Open Settings<\/strong> (press Windows + I<\/strong>) and then follow Apps > Apps & Features<\/strong>.<\/li>\n\n\n\n
- Select the problematic app and click Uninstall > Uninstall<\/strong>.<\/li>\n<\/ul>
<\/figure>\n- Finally, click Yes<\/strong> when prompted to confirm your action. That’s it. The app will be removed from your system.<\/li>\n<\/ul>
#5 Reinstall the Correct App Version<\/strong><\/h3>If the application you removed is important, you can reinstall the latest compatible application version. While reinstalling the app, make sure that you’re downloading it from the official site only. Additionally, check the version you’re downloading and the app support. If there’s any issue, restart your system and see if you can do it now without any issues.<\/p>
#6 Uninstall Buggy Windows Updates<\/strong><\/h3>If you encountered the error after installing any Windows update, you can simply uninstall it or perform a system restore. Remember, uninstalling the update will remove all the changes, and settings that occurred to your system. If certain, remove the buggy Windows update with the following steps:<\/p>
\n- Open Settings<\/strong> by pressing Windows + I<\/strong> and then go to Update & Security > Windows Update > Update history.<\/strong><\/li>\n<\/ul>
<\/figure>\n- On the next prompt, click Uninstall updates.<\/li>\n<\/ul>
<\/figure>\n- Select the update you recently installed and then click Uninstall<\/strong>.<\/li>\n<\/ul>
<\/figure>The update will be removed. Reboot your system and see if the problem is solved.<\/p>
No Qt Platform Plugin Could be Initialized Error- Gone for Good!<\/strong><\/h2>System errors like Application Failed to Start Because No Qt Platform Plugin Could be Initialized, are easily fixable. You just need to put more attention while performing the methods discussed above. Other than this, if you encounter a problem accessing your system or some folder, your data could be at risk. Keep professional data recovery software<\/a> handy, it will help you big time even in the future.<\/p><\/p>
<\/figure>- \n
- Go to Site-Packages<\/strong> from the address bar.<\/li>\n\n\n\n
- Now, open the pyqt5_tools<\/strong> folder, and thereafter, open the Qt<\/strong> folder.<\/li>\n\n\n\n
- Navigate to the bin<\/strong> folder and there, on the blank side, right-click and Paste<\/strong> the folder.<\/li>\n\n\n\n
- Replace the files in the destination (if prompted).<\/li>\n<\/ul>
#2 Run System File Checker Scan<\/strong><\/h3>
There is a possibility that you’d encounter this error due to corrupted or damaged system files. To be sure, you can run SFC (System File Checker). It is a Windows built-in utility to replace the bad versions of system files with the right ones, thus fixing the problems. Follow the given steps:<\/p>
- \n
- Run CMD (Command Prompt) as administrator.<\/li>\n\n\n\n
- In the elevated cmd window, type the sfc\/scannow<\/strong> command and press Enter<\/strong>.<\/li>\n<\/ul><\/figure>
- \n
- Wait for a while and let the process complete.<\/li>\n\n\n\n
- Once done, read the instructions on the screen and check if you need to follow any further instructions.<\/li>\n\n\n\n
- Finally, exit the Command Prompt window and check if the error persists.<\/li>\n<\/ul>
Note: <\/strong>How to Run System File Checker (SFC) Scan in Windows<\/strong><\/a><\/figure> #3 Perform Clean Boot<\/strong><\/h3>
Various third-party apps installed on your system can also cause this error. Performing a clean boot will help you find the root cause behind the error and fix the issue. It is quite similar to booting your PC in Safe Mode<\/a>. However, it provides more control over programs and services running at startup. Follow the given steps to do the same:<\/p>
- \n
- Open Windows Search<\/strong> and type msconfig<\/strong>. It will show System Configuration<\/strong>, click Open<\/strong> to proceed.<\/li>\n<\/ul><\/figure>
- \n
- Go to the Services<\/strong> tab and select Hide all Microsoft Services > Disable all > Apply<\/strong>.<\/li>\n<\/ul><\/figure>
- \n
- Now, click OK<\/strong> and then follow Startup > Open Task Manager<\/strong>.<\/li>\n\n\n\n
- There, identify the application with which you are facing the issue and click Disable<\/strong>.<\/li>\n<\/ul>
<\/figure>- \n
- Close the window, and click OK<\/strong> to complete the process on the Startup<\/strong> tab.<\/li>\n\n\n\n
- When your system will restart, it will be in a clean boot environment. If still, you’re having the error, remove the problematic app from your system.<\/li>\n<\/ul>
#4 Uninstall Problematic App<\/strong><\/h3>
If you see the error with some particular application, check the app version. If there’s an old or incompatible app version you’re using, you can uninstall it. Follow the given steps to do the same:<\/p>
- \n
- Open Settings<\/strong> (press Windows + I<\/strong>) and then follow Apps > Apps & Features<\/strong>.<\/li>\n\n\n\n
- Select the problematic app and click Uninstall > Uninstall<\/strong>.<\/li>\n<\/ul>
<\/figure>- \n
- Finally, click Yes<\/strong> when prompted to confirm your action. That’s it. The app will be removed from your system.<\/li>\n<\/ul>
#5 Reinstall the Correct App Version<\/strong><\/h3>
If the application you removed is important, you can reinstall the latest compatible application version. While reinstalling the app, make sure that you’re downloading it from the official site only. Additionally, check the version you’re downloading and the app support. If there’s any issue, restart your system and see if you can do it now without any issues.<\/p>
#6 Uninstall Buggy Windows Updates<\/strong><\/h3>
If you encountered the error after installing any Windows update, you can simply uninstall it or perform a system restore. Remember, uninstalling the update will remove all the changes, and settings that occurred to your system. If certain, remove the buggy Windows update with the following steps:<\/p>
- \n
- Open Settings<\/strong> by pressing Windows + I<\/strong> and then go to Update & Security > Windows Update > Update history.<\/strong><\/li>\n<\/ul><\/figure>
- \n
- On the next prompt, click Uninstall updates.<\/li>\n<\/ul><\/figure>
- \n
- Select the update you recently installed and then click Uninstall<\/strong>.<\/li>\n<\/ul><\/figure>
The update will be removed. Reboot your system and see if the problem is solved.<\/p>
No Qt Platform Plugin Could be Initialized Error- Gone for Good!<\/strong><\/h2>
System errors like Application Failed to Start Because No Qt Platform Plugin Could be Initialized, are easily fixable. You just need to put more attention while performing the methods discussed above. Other than this, if you encounter a problem accessing your system or some folder, your data could be at risk. Keep professional data recovery software<\/a> handy, it will help you big time even in the future.<\/p>
<\/p>
- Select the update you recently installed and then click Uninstall<\/strong>.<\/li>\n<\/ul>
- On the next prompt, click Uninstall updates.<\/li>\n<\/ul>
- Open Settings<\/strong> by pressing Windows + I<\/strong> and then go to Update & Security > Windows Update > Update history.<\/strong><\/li>\n<\/ul>
- Select the problematic app and click Uninstall > Uninstall<\/strong>.<\/li>\n<\/ul>
- When your system will restart, it will be in a clean boot environment. If still, you’re having the error, remove the problematic app from your system.<\/li>\n<\/ul>
- There, identify the application with which you are facing the issue and click Disable<\/strong>.<\/li>\n<\/ul>
- Now, click OK<\/strong> and then follow Startup > Open Task Manager<\/strong>.<\/li>\n\n\n\n
- Go to the Services<\/strong> tab and select Hide all Microsoft Services > Disable all > Apply<\/strong>.<\/li>\n<\/ul>
- Open Windows Search<\/strong> and type msconfig<\/strong>. It will show System Configuration<\/strong>, click Open<\/strong> to proceed.<\/li>\n<\/ul>
- Now, open the pyqt5_tools<\/strong> folder, and thereafter, open the Qt<\/strong> folder.<\/li>\n\n\n\n
![\"Download](\"https:\/\/www.stellarinfo.com\/images\/free-download-windows.png\")
<\/a><\/figure>\n<\/div>