{"id":44265,"date":"2019-08-30T17:58:30","date_gmt":"2019-08-30T17:58:30","guid":{"rendered":"https:\/\/www.stellarinfo.com\/blog\/?p=44265"},"modified":"2024-12-27T06:40:27","modified_gmt":"2024-12-27T06:40:27","slug":"steps-effortless-data-recovery-from-raid-hard-drives","status":"publish","type":"post","link":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/","title":{"rendered":"Perform Data Recovery from RAID Hard Drives"},"content":{"rendered":"<?xml encoding=\"utf-8\" ?><?xml encoding=\"utf-8\" ?><div class=\"wp-block-image\">\n<figure class=\"aligncenter\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives-1024x576.png\" alt=\"Steps Effortless Data Recovery from RAID\" class=\"wp-image-44267 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives-1024x576.png 1024w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives-300x169.png 300w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives-768x432.png 768w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png 1280w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">Figure: Steps for Effortless Data Recovery from RAID<\/figcaption><\/figure>\n<\/div><p>It&rsquo;s a common belief that RAID arrays&mdash; except RAID 0&mdash;should\nnot fail due to their fault-tolerance and auto rebuild capabilities. Consequently,\nRAID backups are rarely done, which often leads to inevitable data disaster.<\/p><p>Depending on the RAID configuration and implementation&mdash;<em>software or hardware-based<\/em>&mdash; a RAID array\nmay degrade, fail, or get damaged and corrupt due to several reasons. And some\nof the common reasons are as follow,<\/p><ul class=\"wp-block-list\">\n<li>Hardware or software failure<\/li>\n\n\n\n<li>Human errors<\/li>\n\n\n\n<li>Virus or malware infection<\/li>\n\n\n\n<li>Power outage<\/li>\n\n\n\n<li>Abrupt and forced system shutdown or system crash<\/li>\n\n\n\n<li>Disk errors or failure<\/li>\n\n\n\n<li>Mechanical or physical damage<\/li>\n\n\n\n<li>RAID rebuild errors and more<\/li>\n<\/ul><p>These errors may occur during normal use of the RAID array\nor while RAID rebuild process. <\/p><h2 class=\"wp-block-heading\" id=\"steps-to-recover-data-from-raid-drives-\"><strong>Steps to Recover Data from RAID Drives <\/strong><\/h2><p>The following steps help you to recover data from RAID 0,\nRAID 5, and RAID 6 drives effortlessly. All you need to do is select a few\noptions and save recovered data after a &lsquo;Quick&lsquo; or &lsquo;Deep&rsquo; scan. <\/p><h3 class=\"wp-block-heading has-vivid-red-color has-text-color\" id=\"h-step-1-inspect-raid-drives-for-errors\">Step 1: Inspect RAID Drives for Errors<\/h3><p>Unplug the RAID drives from RAID array and connect it to a\nWindows PC individually via SATA connector or use SATA to USB converter\ncable\/enclosure. Then,<\/p><ul class=\"wp-block-list\">\n<li>Install and run <strong><a href=\"https:\/\/www.stellarinfo.com\/windows-raid-recovery.php\" target=\"_blank\" rel=\"noreferrer noopener\">Stellar Data Recovery Technician<\/a><\/strong> software<\/li>\n<\/ul><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img decoding=\"async\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/5-88.png\" alt=\"Stellar\" class=\"wp-image-73608 apply-gradient-on-post-images\"><\/figure>\n<\/div><ul class=\"wp-block-list\">\n<li>Click &lsquo;<strong>Monitor Drive<\/strong>&rsquo; under the <strong>Waffle icon<\/strong> menu at the top-right, choose RAID drive(s)&mdash;one at a time&mdash;to check the RAID drive health, performance, and SMART status. You may also scan and check the drive for bad sectors&mdash;which may have led to a RAID failure<\/li>\n<\/ul><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"906\" height=\"599\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/6-8.png\" alt=\"Stellar\" class=\"wp-image-73611 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/6-8.png 906w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/6-8-300x198.png 300w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/6-8-768x508.png 768w\" sizes=\"auto, (max-width: 906px) 100vw, 906px\" \/><\/figure>\n<\/div><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"905\" height=\"600\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/SC1-3.png\" alt=\"Stellar\" class=\"wp-image-73613 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/SC1-3.png 905w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/SC1-3-300x199.png 300w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/SC1-3-768x509.png 768w\" sizes=\"auto, (max-width: 905px) 100vw, 905px\" \/><\/figure>\n<\/div><ul class=\"wp-block-list\">\n<li>If the RAID drive health status is all green or\norange with no critical SMART errors, skip to the <strong>Step 2<\/strong>. If the drive health is poor and you see errors under SMART\nStatus, follow the instructions below to clone degraded RAID drive(s),<\/li>\n<\/ul><p class=\"has-very-light-gray-background-color has-background\"><strong><em>NOTE:<\/em><\/strong><em> This drive cloning is optional but highly recommended for safe data\nrecovery from RAID drives<\/em><\/p><ul class=\"wp-block-list\">\n<li>Connect a new or healthy hard drive with volume size equal or larger than the affected RAID drive <\/li>\n\n\n\n<li>Click &lsquo;<strong>Clone Disk<\/strong>&rsquo; and choose the <em>source (affected drive)<\/em> and <em>target disk (new or healthy drive)<\/em> from respective drop-downs<\/li>\n<\/ul><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"905\" height=\"600\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/Choose-Source-and-Target-disk-carefully-for-cloning-3.png\" alt=\"Stellar\" class=\"wp-image-73614 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/Choose-Source-and-Target-disk-carefully-for-cloning-3.png 905w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/Choose-Source-and-Target-disk-carefully-for-cloning-3-300x199.png 300w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/Choose-Source-and-Target-disk-carefully-for-cloning-3-768x509.png 768w\" sizes=\"auto, (max-width: 905px) 100vw, 905px\" \/><\/figure>\n<\/div><ul class=\"wp-block-list\">\n<li>Click &lsquo;<strong>Clone<\/strong>&rsquo;\nand click &lsquo;<strong>Start<\/strong>&rsquo; to accept and\nbegin clone process<\/li>\n<\/ul><figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"633\" height=\"321\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/degraded-raid-array-warning.png\" alt=\"Stellar\" class=\"wp-image-44269 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/degraded-raid-array-warning.png 633w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/degraded-raid-array-warning-300x152.png 300w\" sizes=\"auto, (max-width: 633px) 100vw, 633px\" \/><\/figure><ul class=\"wp-block-list\">\n<li>Wait for the cloning process to finish. Repeat\nthe steps for other degraded RAID drives<\/li>\n<\/ul><p>After the clone, replace the degraded RAID drive with a newly cloned hard drive and proceed to the next step to perform <strong><a href=\"https:\/\/www.stellarinfo.com\/windows-raid-recovery.php\">effortless data recovery from RAID drives<\/a><\/strong>. <\/p><h3 class=\"wp-block-heading has-vivid-red-color has-text-color\" id=\"h-step-2-recover-data-from-raid-0-raid-5-and-raid-6-drives\">Step 2: Recover Data from RAID 0, RAID 5, and RAID 6 drives<\/h3><ol class=\"wp-block-list\">\n<li>Close the<em> Drive Monitor<\/em> window and start the software again.<\/li>\n<\/ol><ul class=\"wp-block-list\">\n<li>Choose &lsquo;<strong>All Data<\/strong>&rsquo; and click &lsquo;<strong>Next.<\/strong>&rsquo;<\/li>\n<\/ul><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img decoding=\"async\" src=\"https:\/\/www.stellarinfo.com\/public\/image\/catalog\/screenshot\/wdr-tech\/1-stellar-data-recovery-technician-select-data-type.png\" alt=\"Stellar\" class=\"wp-image-73617 apply-gradient-on-post-images\"><\/figure>\n<\/div><p class=\"has-very-light-gray-background-color has-background\"><strong><em>Pro Tip:<\/em><\/strong><em> You can use &lsquo;<strong>Add Header<\/strong>&rsquo; option from main menu to\nadd custom or uncommon file types based on sample files for data recovery. This\noption enables you to recover virtually any file type from any Windows-based\nmedia including RAID 0, RAID 5, and RAID 6 arrays. <\/em><\/p><ul class=\"wp-block-list\">\n<li>Click &lsquo;<strong>Raid Recovery<\/strong>&rsquo; under &lsquo;<em>Other Location<\/em>s&rsquo; and then click &lsquo;<strong>Scan.<\/strong>&rsquo;<\/li>\n<\/ul><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img decoding=\"async\" src=\"https:\/\/www.stellarinfo.com\/public\/image\/catalog\/screenshot\/wdr-tech\/2-stellar-data-recovery-technician-select-location.png\" alt=\"Stellar\" class=\"wp-image-73618 apply-gradient-on-post-images\"><\/figure>\n<\/div><ul class=\"wp-block-list\">\n<li>Choose the <strong>RAID<\/strong> tab&mdash;<em>RAID 0, RAID 5, or\nRAID 6<\/em> <\/li>\n<\/ul><figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"645\" height=\"421\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/reconstruct-array.jpg\" alt=\"Stellar\" class=\"wp-image-44270 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/reconstruct-array.jpg 645w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/reconstruct-array-300x196.jpg 300w\" sizes=\"auto, (max-width: 645px) 100vw, 645px\" \/><\/figure><ul class=\"wp-block-list\">\n<li>All the hard disks connected to the system are\nvisible under &lsquo;<strong>Select Hard drives to\nreconstruct RAID<\/strong>&rsquo; list box. Click on the hard disks&mdash;one at a time&mdash;and use\nthe arrow button to add or remove RAID\ndrives from the &lsquo;<strong>Select Hard drives to\nReconstruct RAID<\/strong>&rsquo; list box to &lsquo;<strong>Move\nhard drives up\/down for disk order<\/strong>&rsquo;\nlist box<\/li>\n<\/ul><figure class=\"wp-block-image\"><img decoding=\"async\" class=\"apply-gradient-on-post-images\" src=\"https:\/\/www.stellarinfo.com\/screenshots\/windows-data-recovery-version-tech\/4.jpg\" alt=\"Windows Data Recovery\"><\/figure><ul class=\"wp-block-list\">\n<li>Use\nthe up or down arrow buttons adjacent to the list view box to arrange disks in\nsequence, which sequence starts from Disk 0. Arrange disks in the same order as\nthey were in the respective RAID stack<\/li>\n\n\n\n<li>Click the &lsquo;<strong>Don&rsquo;t know start sector of drives. Show a list of probable start\nsectors<\/strong>&rsquo; checkbox: only if you don&rsquo;t know the start sector of the drive. A new checklist\nbox appears in the &lsquo;<strong>Select RAID\nParameter<\/strong>&rsquo; section<\/li>\n<\/ul><figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"645\" height=\"421\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/reconstruct-array3step.jpg\" alt=\"Stellar\" class=\"wp-image-44271 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/reconstruct-array3step.jpg 645w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/reconstruct-array3step-300x196.jpg 300w\" sizes=\"auto, (max-width: 645px) 100vw, 645px\" \/><\/figure><ul class=\"wp-block-list\">\n<li>Choose one or more probable start sectors or\nadd desired start sector in the text box &amp; click the &lsquo;<strong>Add Sector<\/strong>&rsquo; button<\/li>\n\n\n\n<li>Choose\nstripe or block size from the &lsquo;<strong>Select\nStripe\/Block Size<\/strong>&rsquo;; Select parity order or rotation from the &lsquo;<strong>Select Parity Order\/Rotation<\/strong>&rsquo; dropdown;\nand then select the parity repetition or delay from the &lsquo;<strong>Select Parity Repetition\/Delay<\/strong>&rsquo; dropdown. The RAID admin or user\nwho built it knows these values<\/li>\n<\/ul><figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"645\" height=\"421\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/Last-Synch-Option-Reconstruct-raid-array.jpg\" alt=\"Stellar\" class=\"wp-image-44272 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/Last-Synch-Option-Reconstruct-raid-array.jpg 645w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/Last-Synch-Option-Reconstruct-raid-array-300x196.jpg 300w\" sizes=\"auto, (max-width: 645px) 100vw, 645px\" \/><\/figure><ul class=\"wp-block-list\">\n<li>After\nadding and selecting the respective RAID parameters in the software, click the\n&lsquo;<strong>Build RAID<\/strong>&rsquo; button <\/li>\n<\/ul><figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"645\" height=\"421\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/scanning-raid-volume.jpg\" alt=\"Stellar\" class=\"wp-image-44273 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/scanning-raid-volume.jpg 645w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/scanning-raid-volume-300x196.jpg 300w\" sizes=\"auto, (max-width: 645px) 100vw, 645px\" \/><\/figure><ul class=\"wp-block-list\">\n<li>Wait until the software reconstructs your RAID\nvolume or probable RAID volumes if you don&rsquo;t know required RAID parameters<\/li>\n<\/ul><figure class=\"wp-block-image\"><img decoding=\"async\" class=\"apply-gradient-on-post-images\" src=\"https:\/\/www.stellarinfo.com\/screenshots\/windows-data-recovery-version-tech\/11.jpg\" alt=\"Windows Data Recovery\"><\/figure><ul class=\"wp-block-list\">\n<li>After RAID construction is finished, the RAID volume(s) is displayed in the &lsquo;<strong>Select Constructed RAID<\/strong>&rsquo; window. Click on &lsquo;<strong>Show Volume List<\/strong>&rsquo; button<\/li>\n\n\n\n<li>In &lsquo;<strong>Select Volume to Recover Data<\/strong>&rsquo;, choose the volume from the listed volumes of RAID<\/li>\n\n\n\n<li>Then click the &lsquo;<strong>Scan<\/strong>&rsquo; button and wait for the scan to finish <\/li>\n<\/ul><figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"423\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/raid-known-4-2.png\" alt=\"Stellar\" class=\"wp-image-73620 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/raid-known-4-2.png 600w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/raid-known-4-2-300x212.png 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure><ul class=\"wp-block-list\">\n<li>If the desired files are not found in the scan results, click the &lsquo;<strong>Click Here<\/strong>&rsquo; link beside Deep Scan text at the bottom of the software to begin &lsquo;<strong>Deep Scan<\/strong>&rsquo; process<\/li>\n<\/ul><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"880\" height=\"620\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/16_Preview-Data.png\" alt=\"Stellar\" class=\"wp-image-73621 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/16_Preview-Data.png 880w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/16_Preview-Data-300x211.png 300w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/16_Preview-Data-768x541.png 768w\" sizes=\"auto, (max-width: 880px) 100vw, 880px\" \/><\/figure>\n<\/div><ul class=\"wp-block-list\">\n<li>Click on the &lsquo;<strong>File Type<\/strong>&rsquo; tab and use the search bar to quickly find required data fro recovery<\/li>\n\n\n\n<li>At this stage, you can click on a file to see its preview and then choose the files and folders that you want to recover<\/li>\n<\/ul><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"880\" height=\"620\" src=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/17_Destination-2.png\" alt=\"Stellar\" class=\"wp-image-73622 apply-gradient-on-post-images\" srcset=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/17_Destination-2.png 880w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/17_Destination-2-300x211.png 300w, https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2021\/02\/17_Destination-2-768x541.png 768w\" sizes=\"auto, (max-width: 880px) 100vw, 880px\" \/><\/figure>\n<\/div><ul class=\"wp-block-list\">\n<li>Then click the &lsquo;<strong>Recover&rsquo;<\/strong> and then<strong> &lsquo;Browse&rsquo; <\/strong>button\nto select a save location&mdash;where you want to save the recovered data. <\/li>\n<\/ul><p class=\"has-very-light-gray-background-color has-background\"><strong><em>NOTE:<\/em><\/strong><em>\nMake sure not to select the drive, which was\nin the RAID array and now connected to your PC for recovery. Use an external\ndisk or internal disk with enough storage space to save recovered data.<\/em><\/p><p><em>If\nyou are running low on storage, save the scan information to recover data in\nstages<\/em><\/p><ul class=\"wp-block-list\">\n<li>Click the &lsquo;<strong>Start Saving<\/strong>&rsquo; button. The selected recovered files and folders will\nbe saved at your desired location<\/li>\n<\/ul><p>After data recovery, you may go ahead and build the desired RAID array from scratch. In case you need help, read this blog post that helps you decide <a href=\"https:\/\/www.stellarinfo.com\/blog\/how-to-choose-the-best-raid-level-for-new-disk-array\/\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>which RAID level to choose for your data storage needs<\/strong><\/a>.&nbsp; <\/p><h2 class=\"wp-block-heading\" id=\"conclusion\"><strong>Conclusion<\/strong><\/h2><p>It is recommended that you should check RAID drives once in a while for SMART errors, mechanical issues, and optimization. You can perform these checks manually or automate using a tool such as <em><strong>Drive Monitor<\/strong><\/em>. These checks help you safeguard your RAID array against many common causes of RAID failure.<\/p><p>However, if RAID fails, you can use <strong><a href=\"https:\/\/www.stellarinfo.com\/windows-raid-recovery.php\">Stellar Data Recovery Technician<\/a><\/strong>software as an ultimate solution for your entire RAID and other Windows data recovery needs. The software can get back virtually any file format from a broken, corrupt, and degraded RAID 0, RAID 5, and RAID 6 array in no time. You can also bring back deleted files from RAID arrays and Windows-based storage media such as hard drives, memory cards, SSDs, thumb drives, and more. <\/p><p>All you have to do is connect RAID drives, and with a few\nclicks, the software reconstructs RAID volumes&mdash;even if you don&rsquo;t know or\nremember the RAID parameters. You can then scan the reconstructed virtual RAID\n0, RAID 5, or RAID 6 array and recover data effortlessly from RAID drives.<\/p><p>Plus, the software comes with photo and video repair tools\nthat can help your fix a corrupt or severely corrupt photo or video file.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>It&rsquo;s a common belief that RAID arrays&mdash; except RAID 0&mdash;should not fail&hellip; <a class=\"more-link\" href=\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\">Continue reading <span class=\"screen-reader-text\">Perform Data Recovery from RAID Hard Drives<\/span><\/a><\/p>\n","protected":false},"author":7,"featured_media":44267,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[803],"tags":[],"class_list":["post-44265","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-raid-data-recovery","entry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Perform Data Recovery from RAID Hard Drives | Stellar<\/title>\n<meta name=\"description\" content=\"Step-by-Step Guide to take you through an effortless way to perform data recovery from RAID 0, RAID 5, and RAID 6 drives in Windows OS.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Perform Data Recovery from RAID Hard Drives | Stellar\" \/>\n<meta property=\"og:description\" content=\"Step-by-Step Guide to take you through an effortless way to perform data recovery from RAID 0, RAID 5, and RAID 6 drives in Windows OS.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\" \/>\n<meta property=\"og:site_name\" content=\"Stellar Data Recovery Blog\" \/>\n<meta property=\"article:published_time\" content=\"2019-08-30T17:58:30+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-12-27T06:40:27+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1280\" \/>\n\t<meta property=\"og:image:height\" content=\"720\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Eric Simson\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Eric Simson\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\"},\"author\":{\"name\":\"Eric Simson\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/b4823430443e4bb02f48d6dfaad50f89\"},\"headline\":\"Perform Data Recovery from RAID Hard Drives\",\"datePublished\":\"2019-08-30T17:58:30+00:00\",\"dateModified\":\"2024-12-27T06:40:27+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\"},\"wordCount\":1198,\"commentCount\":2,\"image\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png\",\"articleSection\":[\"Raid Data Recovery\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\",\"url\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\",\"name\":\"Perform Data Recovery from RAID Hard Drives | Stellar\",\"isPartOf\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png\",\"datePublished\":\"2019-08-30T17:58:30+00:00\",\"dateModified\":\"2024-12-27T06:40:27+00:00\",\"author\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/b4823430443e4bb02f48d6dfaad50f89\"},\"description\":\"Step-by-Step Guide to take you through an effortless way to perform data recovery from RAID 0, RAID 5, and RAID 6 drives in Windows OS.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage\",\"url\":\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png\",\"contentUrl\":\"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png\",\"width\":1280,\"height\":720,\"caption\":\"Steps Effortless Data Recovery from RAID\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.stellarinfo.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Perform Data Recovery from RAID Hard Drives\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/#website\",\"url\":\"https:\/\/www.stellarinfo.com\/blog\/\",\"name\":\"Stellar Data Recovery Blog\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.stellarinfo.com\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/b4823430443e4bb02f48d6dfaad50f89\",\"name\":\"Eric Simson\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/944393a40609b2d087c131b021f96dda56d23e694371e0b73b29dbd86851ffe2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/944393a40609b2d087c131b021f96dda56d23e694371e0b73b29dbd86851ffe2?s=96&d=mm&r=g\",\"caption\":\"Eric Simson\"},\"description\":\"Eric Simson is an Email Platform Consultant and is associated with Stellar Data Recovery from last 6 years. He writes about the latest technology tips and provides custom solutions related to MS Outlook, MS Exchange Server, Office 365, and many other Email Clients &amp; Servers.\",\"sameAs\":[\"https:\/\/www.linkedin.com\/in\/eric-simson-30bb8222a\/\"],\"url\":\"https:\/\/www.stellarinfo.com\/blog\/author\/priyal\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Perform Data Recovery from RAID Hard Drives | Stellar","description":"Step-by-Step Guide to take you through an effortless way to perform data recovery from RAID 0, RAID 5, and RAID 6 drives in Windows OS.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/","og_locale":"en_US","og_type":"article","og_title":"Perform Data Recovery from RAID Hard Drives | Stellar","og_description":"Step-by-Step Guide to take you through an effortless way to perform data recovery from RAID 0, RAID 5, and RAID 6 drives in Windows OS.","og_url":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/","og_site_name":"Stellar Data Recovery Blog","article_published_time":"2019-08-30T17:58:30+00:00","article_modified_time":"2024-12-27T06:40:27+00:00","og_image":[{"width":1280,"height":720,"url":"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png","type":"image\/png"}],"author":"Eric Simson","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Eric Simson","Est. reading time":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#article","isPartOf":{"@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/"},"author":{"name":"Eric Simson","@id":"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/b4823430443e4bb02f48d6dfaad50f89"},"headline":"Perform Data Recovery from RAID Hard Drives","datePublished":"2019-08-30T17:58:30+00:00","dateModified":"2024-12-27T06:40:27+00:00","mainEntityOfPage":{"@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/"},"wordCount":1198,"commentCount":2,"image":{"@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage"},"thumbnailUrl":"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png","articleSection":["Raid Data Recovery"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/","url":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/","name":"Perform Data Recovery from RAID Hard Drives | Stellar","isPartOf":{"@id":"https:\/\/www.stellarinfo.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage"},"image":{"@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage"},"thumbnailUrl":"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png","datePublished":"2019-08-30T17:58:30+00:00","dateModified":"2024-12-27T06:40:27+00:00","author":{"@id":"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/b4823430443e4bb02f48d6dfaad50f89"},"description":"Step-by-Step Guide to take you through an effortless way to perform data recovery from RAID 0, RAID 5, and RAID 6 drives in Windows OS.","breadcrumb":{"@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#primaryimage","url":"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png","contentUrl":"https:\/\/www.stellarinfo.com\/blog\/wp-content\/uploads\/2019\/08\/How-to-recover-data-From-RAID-Drives.png","width":1280,"height":720,"caption":"Steps Effortless Data Recovery from RAID"},{"@type":"BreadcrumbList","@id":"https:\/\/www.stellarinfo.com\/blog\/steps-effortless-data-recovery-from-raid-hard-drives\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.stellarinfo.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Perform Data Recovery from RAID Hard Drives"}]},{"@type":"WebSite","@id":"https:\/\/www.stellarinfo.com\/blog\/#website","url":"https:\/\/www.stellarinfo.com\/blog\/","name":"Stellar Data Recovery Blog","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.stellarinfo.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/b4823430443e4bb02f48d6dfaad50f89","name":"Eric Simson","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.stellarinfo.com\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/944393a40609b2d087c131b021f96dda56d23e694371e0b73b29dbd86851ffe2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/944393a40609b2d087c131b021f96dda56d23e694371e0b73b29dbd86851ffe2?s=96&d=mm&r=g","caption":"Eric Simson"},"description":"Eric Simson is an Email Platform Consultant and is associated with Stellar Data Recovery from last 6 years. He writes about the latest technology tips and provides custom solutions related to MS Outlook, MS Exchange Server, Office 365, and many other Email Clients &amp; Servers.","sameAs":["https:\/\/www.linkedin.com\/in\/eric-simson-30bb8222a\/"],"url":"https:\/\/www.stellarinfo.com\/blog\/author\/priyal\/"}]}},"_links":{"self":[{"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/posts\/44265","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/comments?post=44265"}],"version-history":[{"count":17,"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/posts\/44265\/revisions"}],"predecessor-version":[{"id":176442,"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/posts\/44265\/revisions\/176442"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/media\/44267"}],"wp:attachment":[{"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/media?parent=44265"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/categories?post=44265"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.stellarinfo.com\/blog\/wp-json\/wp\/v2\/tags?post=44265"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}