CDFS FILE SYSTEM blue screen issue typically appears out of nowhere and renders the PC inaccessible. The error also stops the system sometimes from carrying out a particular task.
CDFS FILE SYSTEM issue prevents the system from installing Windows and shows an error code 0x00000026. To avoid damage and possible data loss, Windows immediately restarts when the CDFs error message appears. To know how you can fix this annoying problem? Continue reading.
Update your drivers frequently to prevent BSoD problems, as out-of-date or incompatible drivers bring on many BSoD errors in your system. Practically, any driver has the potential to make CDFS FILE SYSTEM appear, so updating all your drivers is strongly advised.
Start with the motherboard, chipset, and audio drivers, then update your network card and graphic card drivers. After that, you only need to find your device on the hardware manufacturer’s website, discover the latest drivers for it and download them. Or you can do it the following way:
The operating system launches in diagnostic mode rather than regular operating mode when it is in the safe mode. After installing an update, a device driver, or new software, it is generally used to troubleshoot computers that have crashed, failed to boot correctly, or are unstable.
In this mode, the operating system only loads the bare minimum of drivers and services to isolate problems causing system instability.
If you don’t encounter the error in safe mode, then a third-party application or driver is probably causing this issue.
Windows System File Checker (SFC) is a helpful command-line tool for scanning and fixing protected system files. It’s the simplest and quickest method for evaluating your computer’s stability, spotting installation and update issues, and, when possible, locating replacements for lost or damaged files. You should do this before starting DISM.
You can use a command-line utility called Deployment Image Servicing and Management (DISM.exe) to prepare and service Windows images, including those used for Windows Setup, Windows PE, and Windows Recovery Environment (Windows RE). A virtual hard disk or a Windows image (.wim) can be maintained using DISM.
DISM is pre-installed in Windows, and you can access it via the command line or Windows PowerShell.
A command called CHKDSK can be used to check the status of a volume, such as a disk, and fix any issues discovered. Computers must already have the Autochk.exe file installed to run CHKDSK.
Administrators can choose which switches to use with CHKDSK. For instance, using /f instructs CHKDSK to correct any faults it discovers. By specifying /r, CHKDSK is instructed to search for and recover any readable data on a disk’s faulty sectors.
Resetting Windows gives you a fresh start without unnecessary applications or data, freeing up system space and enhancing computer speed.
Malware on your computer will also be removed via a system restore, making it safe to sell or give away.
A backup is necessary if you don’t want your stuff deleted because resetting your computer would delete all your programs and information.
Stellar Data Recovery Professional for Windows can recover your lost files from the selected hard drive. You can also make bootable media that will allow you to recover your files from a PC that won’t boot.
To retrieve files from a hard drive:
This procedure doesn’t need any backups and will recover your files in a few seconds. But if your PC won’t boot up due to the CDFS error, here’s what to do:
To recover files from an unbootable PC:
Since the problem is known to be related to Windows files, malfunctioning hardware is less likely to be the source of the problem. Consequently, solving the problem takes a few minutes.
Resetting Windows will be your last resort because it will delete everything from your computer. You can still recover the deleted data with the Stellar Data Recovery professional program. Therefore, none of the solutions listed above pose a significant danger, making them all doable by the user. You can still visit a technician to get your PC diagnosed and receive expert assistance.
Once the application scans your drive, you will need to purchase it to save the recovered files beyond 1 GB.
Yes, it is free. However, it offers limited services, and you cannot use it to create bootable media for unbootable PCs.
Thanks to the simple and user-friendly interface, you won’t need any special expertise to recover your files with Stellar Data Recovery Professional.
As a technophile, Farhad has spent the last decade getting hands-on experience with a variety of electronic devices, including smartphones, accessories, laptops, wearables, printers, and so on. When he isn't writing, you can bet he's devouring information on products making their market foray, demonstrating his unquenchable thirst for technology.
Stellar Data Recovery Premium for WindowRead More
Stellar Data Recovery Technician intelliRead More
Stellar Data Recovery Toolkit is an advaRead More
BitRaser File Eraser is a 100% secure soRead More